Tasel

Based on three characteristics: good quality sound, easy to make, and not expensive circuit, this TOSHIBA DX is worth to try. Just need 36VDC voltage input as a fuel, the circuit can produce 100W output on 40 Ohm speaker or 50W on 80 Ohm, using a pair of TOSHIBA A1943 – C5200 per channel.

For large source supply at your amplifier or another application, this DC-DC converter is recommended. This circuit already tested, and no problem when connected the load.

Basic operation of this circuit is similar DC to DC converter. With input from 18VAC at 800mA then converted to DC by B1 bridge rectifier. R11 work as adjuster, a twin of IRF510 as final amplifier, and a CT transformer is the last converter to provide the high voltage output.

Based on three characteristics: good quality sound, easy to make, and not expensive circuit, this TOSHIBA DX is worth to try. Just need 36VDC voltage input as a fuel, the circuit can produce 100W output on 40 Ohm speaker or 50W on 80 Ohm, using a pair of TOSHIBA A1943 – C5200 per channel.

This circuit ease you to control any appliance with infra red remote. Can be used for electrical devices like lamp, fan, etc. With power supply from itself, the circuit make the application compact and easy to control. The circuit looks for any modulated IR source and uses it to control a TRIAC, which then switches [...]

TDA7294, monolithic IC with output up to 100W as main core for this useful audio amplifier. This circuit is a mono for a single channel in 4Ω or 8Ω load. Simple audio class A-B amplifier.

This circuit is for a solar powered white LED which automatically turn on in the dark. Can be applied for outdoor or indoor night light uses. For indoor applications, when the circuit is operated near another lamp, it can be set to automatically active if the other lamp is turned off. Circuit features include selectable [...]

Here is the VU meter with 12 LEDs circuit. This is an easy visual indicator of the audio level signals. Can be applied to various input levels, adjusted by trimmer TR1 (state) – TR2 (Gain), then rectified by diodes D1-D2 (standard negative mark-recovery periods) and provide in the main circuit indication, consisting of the diodes [...]