Tasel

This inverter circuit is very useful for low load application such as emergency light, radio, or DVD player. With transistors as main active component, please take more attention when you assemble this 100 W inverter circuit. Power source of this circuit just 12V DC, but can produce about 100W at 220V AC with simple assembling [...]

This 400 W MOSFET Audio Amplifier using IRFP448 circuit is simple project. With low noise and distortion, but powerful. As the fuel, this project consume 70-80 Vdc and 5 A fuse as the protector for short circuit.

Using IC 4001, 4027, NE555, and CA3130, this circuit can convert 24VDC to 220VAC 300W. A pairs of MJ15003 or 2N3773 as the last active components before drive the pulse into the transformator.

The circuit below is an automatic switch-on emergency light. With IC as automatic controller, and and over charger protector. This circuit will drive the light on when the main power from AC source dismissed.

Conventional power amplifier with high-pass and low-pass filter. Supplied 60V DC, this circuit can produce about 300W sound power. Opamp NE5534 is arranged as a differential amplifier, output of NE5534 is applied to drive stages MJE340 and MJE350 via R6 from pin 6. The output amplifier proper consists of drive stages MJE1530 and MJE1531 and [...]

High-performance amplifier. Ultra low distortion but high voltage DC while operated. Using two on-board 6.5A fuses, just cause this circuit is capable of delivering around 300W of music power into 4Ω, each fuse carries around 4.4A RMS or higher.

Based on super hetero dyning principle. The circuit using 2 RF oscillators. The frequencies of all oscillators are at 5.5 MHz. The first RF oscillator consist of transistor T1 (BF 494) and a 5.5MHz ceramic filter. The 2nd oscillator is a Colpitt’s oscillator accomplished with the help of T3 (BF494) and inductor L1 shunted by [...]

Power amplifier settled on HEXFET IRF9540 and IRF540 which probably produce 65 W at the output. This circuit is simple and have a good audio quality. For thermal static, use heatsink on Q8, Q10, Q11, Q12, and Q13.