Tasel

This inverter circuit is very useful for low load application such as emergency light, radio, or DVD player. With transistors as main active component, please take more attention when you assemble this 100 W inverter circuit. Power source of this circuit just 12V DC, but can produce about 100W at 220V AC with simple assembling [...]

Using IC 4001, 4027, NE555, and CA3130, this circuit can convert 24VDC to 220VAC 300W. A pairs of MJ15003 or 2N3773 as the last active components before drive the pulse into the transformator.

This 400 W MOSFET Audio Amplifier using IRFP448 circuit is simple project. With low noise and distortion, but powerful. As the fuel, this project consume 70-80 Vdc and 5 A fuse as the protector for short circuit.

Very high power amplifier with 10 pairs of power transistor. Can use MJ15024 and MJ15025 or MJ21193 and MJ21194. Those 20 pieces transistor work as final active component for final gain. This circuit required dual output power supply 130V.

This circuit possible to deliver about 200W power output produce by Phillips Semiconductor. Using 2 PHP1BN11QT, input voltage between 30 and 45 VoltsDC for this circuit, trigger the 4Ω impedance load speaker in to a powerful audio output. Other features of this circuit are THD+N (total harmonic distortion-plus-noise) PL = 10 W frequency range from [...]

This is a small and simple audio amplifier with TDA7294. Using 2 TDA7294 for stereo (2×80 watt) mode and bridge mode (180 watt). The TDA7294 for use as class AB audio amplifier.

High-performance amplifier. Ultra low distortion but high voltage DC while operated. Using two on-board 6.5A fuses, just cause this circuit is capable of delivering around 300W of music power into 4Ω, each fuse carries around 4.4A RMS or higher.

Here is 6-transistor 140 Watt audio amplifier. Using 2N3569, 2N3055, 2N4355, and MPS6533 this circuit can be useful for your home audio. The amplifier work with 30 V as the input voltage and produced output will be received by 8 ohm impedance speaker.

The circuit of this 30W audio amplifier produce a clear audio output quality. The circuit module doesn’t have any improvement. With Darlington pair in transistor TIP141 and TIP146. This transistor need heat-sink or better temperature.