Tasel

This inverter circuit is very useful for low load application such as emergency light, radio, or DVD player. With transistors as main active component, please take more attention when you assemble this 100 W inverter circuit. Power source of this circuit just 12V DC, but can produce about 100W at 220V AC with simple assembling [...]

Based on four chips, TL072, TL074, MN3101, and MN3004 which produce four channels of output, the center, rear, front right, and front left surround audio accommodated in a signal of left and right channels. The circuit however can be applied with other basic functions as a standard decoder.

With 4 pairs of 2SC5200 and 2SA1943, this circuit can produce about 500W. Voltage input as the fuel is +/- 65V. And for best result, you must use heatsink and fan. This circuit also feature circuit protection using fuse.

Based on super hetero dyning principle. The circuit using 2 RF oscillators. The frequencies of all oscillators are at 5.5 MHz. The first RF oscillator consist of transistor T1 (BF 494) and a 5.5MHz ceramic filter. The 2nd oscillator is a Colpitt’s oscillator accomplished with the help of T3 (BF494) and inductor L1 shunted by [...]

High-performance amplifier. Ultra low distortion but high voltage DC while operated. Using two on-board 6.5A fuses, just cause this circuit is capable of delivering around 300W of music power into 4Ω, each fuse carries around 4.4A RMS or higher.

Can be a standalone or teamed with Pre-Amp, this circuit show us a high-class headphone amplifier. With low distortion and noise, its seat drive low or high impedance to max power levels. Need only a power supply and a volume control pot for apply among any line-level signal source, and featured dual output.

Very high power amplifier with 10 pairs of power transistor. Can use MJ15024 and MJ15025 or MJ21193 and MJ21194. Those 20 pieces transistor work as final active component for final gain. This circuit required dual output power supply 130V.

Here is a portable headphone amplifier for your music player. This circuit improve the gadget audio outputs with low noise and distortion, as well as a long battery life. With an external amplifier, the headphone driver in the music player is no longer required to supply high currents into a low impedance.